Drill Pipe Screen 5-1/2" drill pipe screen MWD screen
I. Introduction:
Size: 5-1/2", 5", 4-1/2", 3-1/2", 2-7/8"
Application: when used on oilfield drilling, the drill pipe screen is put on the top box connection of the drill pipe, used to
filter the drilling fluid, to prevent sundries from falling into the well, and ensure MWD devices can normally work during the
drilling, also can effectively protect drill bits normally working from any accident.
II. Specifications:
Specification |
Material |
Thickniess |
Tray diameter |
Weight |
Remarks |
2-7/8" |
304 |
3 |
59 |
1 |
Customization according to
clients special requirements is
acceptable, as long as the client
clearly stated drill pipe specs, the
length of the pipe screen, the wall
thickness, the material. |
3-1/2" |
3 |
73 |
2 |
4 |
3 |
84 |
2.5 |
4-1/2 |
4 |
93 |
2.7 |
5 |
5 |
105 |
3 |
5-1/2" |
5 |
116 |
3.5 |
III. Features:
(1) The material is stainless steel, anti-corrosion;
(2) With more filter holes, the hole size is small, the discharge area is big, bringing good filter effect, no-blocking;
(3) The wall thickness of the stainless material is 3mm-5mm, also can be thicker, the pipe is taper tube, also can be
according to client's clients' special requirements to make special surface treatment for erosive wear resistance.
(4) The filter holes are round or long striped according to clients' requirements;
(5) The pipe screen of 3-1/2" and 5" are always in stock, other sizes may be needed to produce according to orders, as
the demands are not so much.
(6) If clients have any special requirements, customization is also accepted.
package: